DCL-33A
Compact size 22.5mm(W) x 75mm(H) x 100mm(D)
with DIN rail controller can be easily installed inside
the control panel. Only units with current output
type can be easily configured to a a transducer by
key operation. When this controller may be used as
a transducer, isolated 4 to 20mA DC signal is outputted
after converted from Thermocouple or RTD input.
| Input |
: |
Thermocouple, RTD, DC Current, DC
Voltage |
| Accuracy |
: |
Within ±0.2% FS ±1digit |
| Sampling period |
: |
0.25 seconds |
| Control action |
: |
Auto-tuning PID, PID, PI, PD, P, ON/OFF |
| Control output |
: |
Relay contact, Non-contact voltage, DC current |
| Supply voltage |
: |
100 to 240V AC 50/60Hz, 24V AC/DC 50/60Hz |
| Option |
: |
Heater burnout alarm, Serial communication (RS-485) |
|
 |
